Industrial Polyester(PES) Fiber Waterproof Oilproof Antistatic Filter Cloth (needled Felt)

Polyeter(PES) fiber and non-woven needled felt filtration material made of it Polyester needled filtration felt is made by polyester fiber and the fabric woven high-strength, low-elongation yarn. The Dacron fibers are needled noto the fabric by needled-punching machine. Polyester fiber has low...

Send Inquiry
Product Details

Polyeter(PES) fiber and non-woven needled felt filtration material made of it


Product Name

Polyeter(PES) fiber

Weight(g/m2)

500~550

Thickness(mm)

1.8~2.2

Air Permeability(m3/m2/min)

14~8

Tensile Strength (N/5×20cm)

Warp

>900

Weft

>1200

Tensile Elongation(%)

Warp

<35

Weft

<50

Working Temperature

Continuous

130

Instantaneous

150

Anti-acid

Good

Anti-alkali

Common

Anti-abrasion

Good

Post treatment

Thread burning, surface smoothing or coating etc.


Polyester needled filtration felt is made by polyester fiber and the fabric woven high-strength, low-elongation yarn. The Dacron fibers are needled noto the fabric by needled-punching machine.

Polyester fiber has low absorption of humidity. The water regain rate under standard condition is 0.4-0.5%, while 0.6-0.8% under the condition of relative humidity 100%. Therefore, the fiber will keep almost the same properties in both dry and wet conditions. It shows good resistance for almost all the atmosphere under the room temperature. The strength of the polyester is high and the elastic recovery performance is good. The strength of it is 3.52-5.28CN/dtex, elongation at break is around 30-40%. The polyester has good size stability, high strength, high elongation and good elastic recovery performance. So that, the polyester fabrics has good abrasion resistance. The glass transition point of polyester fiber is 80, melting point is 255℃~265℃. It starts to become soft at 230℃~240℃. Polyester fiber has very good application function under room temperature. It is the most reasonable filtration materials for the industry conditions with common temperature.

This product has the advantages of high porosity, good permeability, good abrasion resistance and resistance to acid. The consumption amount of polyester is the biggest among the needled felt filtration material. It is widely used in the fields of metallurgical, chemical, building materials, metallurgy, power generation, ceramics, machinery, mining, petroleum, pharmaceutical, food, dye, mining etc. It is currently the most ideal filtration materials for the common temperature conditions.

Three proofing of the non-woven needled felt product has good dimensional stability, high strength, long service life, etc, so it also has the unique advantages such as small resistance, easy to clean. In mineral processing, coal, petroleum, chemical industry, etc, need to filter tiny particles and guarantee, three proofing needled felt far superior performance than the traditional woven filter.

According to special conditions and characteristics of dust, cement by adding compound conductive material to reduce the static electricity, effectively reduce friction produced by electrostatic: on the basis of ordinary including anti-static carpets by special chemical treatment, increase the “waterproof, prevent oil” function, three proofing functional fiber needled felt after nano waterproof, prevent oil treatment has the “lotus leaf effect”, after contact with water, oil filter bag surface is not easy to soak, solve problem of the condensation, paste bag bag anti-static, the filter, condensation, high dust removal efficiency, high porosity rate, gas filtration resistance is small, suitable for the occasion of higher temperature.


Three proofing of the non-woven needled felt product

Raw Materials

Complex antistatic fiber, Polyester fiber

Weight(g/m2)

500~550

Thickness(mm)

1.8~2.2

Air Permeability(m3/m2/min)

10~14

Bulk Density(g/m2)

0.24

Porosity Rate(%)

86

Tensile Strength(N/5×20cm)

Warp

>1100

Weft

>1200

Tensile Elongation(%)

Warp

<35

Weft

<50

Working Temperature

Continuous

90

Instantaneous

130

Spray Rating(Level)

3~4

Dust Stripping Rate(%)

94.40

Static Dust Catching Rate(%)

99.97

Dynamic Resistance(%)

128

Density of Charged(μc/m2)

2.8

Friction Potential(V)

150

Half Life Period(S)

<0.5

Surface Resistance(Ω)

9*1000

Post-treatment

Surface smoothing, thread burning, Teflon coating etc.


Related Products
Inquiry

  • D7, Huashan Industrial Park, Xinfu District, Fushun City, Liaoning Province, China

  • aimeeliu67@hotmail.com

  • +86-024-58217958

Fushun New Oriental Industrial Filtration Material Co.,Ltd